Can Your Entire House Run On Batteries?

The simple answer is YES, but you would need a really large and efficient battery bank.

As highlighted in the video above, Elon Musk, the guy behind the Tesla electric cars is attempting to bring highly efficient battery bank for home usage.

To learn more about the Tesla Powerwall home battery, CLICK HERE.

Tesla Wall Battery

Tesla Powerwall battery for homes

How much does the Tesla Powerwall costs in Australia?

According to Choice Australia:

If you already have solar panels, the Powerwall and a compatible inverter will cost you between $12,000 and $12,500 depending on which inverter you choose.

If you are on a small budget to install a home solar power system, using the Tesla Powerwall would not be a viable option.

So what can you do?

Let’s start by making your home as energy efficient as possible.

How to make your home home energy efficient?

There has been a rapid increase in cost of living all over the world over the years and the cost of energy consumption constitutes a major element of the heavy monthly bills.

This has forced people to find ways of decreasing their monthly budget.

Some people use several electrical devices they do not really require.

Excessive power consumption costs money and therefore, it is worthwhile to purchase only energy saving equipment.

There are specific tools that facilitate users to reduce energy costs.

As producers too utilize electricity, they are well aware of appliances that utilize high wattage.

Lighting is one area which accounts for major consumption of electricity.

Many people have the habit of leaving the lights turned on all through 24 hours.

If it is a daily affair, it amounts to gross misuse of electricity and will have a huge impact on the overall monthly expenses.

One can effectively reduce power consumption by purchasing low-wattage bulbs, like Compact Fluorescent Lamps (CFLs).

They not only use lower wattage to emit powerful beam of light but also last longer.

There are bulbs of different wattage, like the lowest and the highest range.

One can buy these ‘energy-efficient’ bulbs and adjust to the lowest wattage so that substantial reduction in energy consumption can be achieved.

Energy efficient home lighting

Three way lamps are fine examples of this type of lamps.

They also emit powerful beam of light similar to the normal incandescent light and yet, consume lesser watts.

LED lights and Gu 10 bulbs are among the finest energy-saving lighting available these days.

Light Emitting Diode (LED) light is normally very costly at around $70 each; nevertheless, it not only has a long-life span but also assist in conserving fair measure of electricity at home.

Other excellent items that can contribute to reducing energy costs include energy meters, which are complex gadgets that enable assessment of the amount of electricity each electrical point and appliance in the house utilizes.

One should connect them to an electric point or socket and then to the various devices.

It is very essential to install energy meters in the house as these would point out the areas where higher number of units of electricity is consumed in the house so that corrective steps can be taken.

For example, items that utilize a lot of electric current can be replaced with energy saving lights and appliances.

Back-up wall adapters are other varieties of devices that are designed to facilitate keeping the levels of electrical consumption at home within acceptable limits.

Although quite complex in design and manufacture, still, these gadgets are very useful and simple to install.

After proper installation of all electrical appliances that we use daily, one can just turn them off with an easy to- operate remote control.

Some electrical articles, like television utilize electric current even when switched off.

This energy saving remote control device helps to shut off power when a particular equipment or gadget is not in use.

With rising energy consumption and consequent increase in the amounts of electricity bills, people are constantly on the lookout to find various methods to minimize energy consumption in their homes.

Thanks to numerous technological advances, wide range of energy saving devices is now available in the market.

Low wattage bulbs, like the Gu 10 are fine examples of excellent energy-savers.

Additionally, there are specialist consultants who can suggest various methods to reduce electricity consumption in the house.

In case the present electricity bills are alarmingly high, one can consult them.
haveyouseen

And if you’re interested in saving money on your home solar power system battery bank, you can use the EZ Battery Reconditioning program to learn how to:

Get old or “dead” golf cart batteries, industrial or L16 batteries
Recondition them back to 100% of their working condition
Use those “like-new” batteries instead of buying new overpriced batteries to save a lot of money

The guide will also show you how to recondition many other types of old, dead batteries back to 100% of their working condition again (so they’re just like new), including:

Car batteries
Laptop batteries
Cell Phone batteries
Marine batteries
PLUS MANY MORE!

So if you’re ready to learn how to recondition all types of batteries…

…back to 100% of their working condition

…Then click the link below

<CLICK HERE> Show Me The Presentation Now!

Photovoltaic Solar Panels – Supplementing Your Home Energy Needs

A solar panel or Photovoltaic (PV) panel is an interconnected construction of a set of Photovoltaic cells. The main function of a PV panel is to convert sunlight into electrical energy for use in commercial establishments and residential buildings.

The electric power generated using solar panels is called the ‘Photovoltaic effect’. Each solar cell is capable of converting sunlight into electrical energy. However, each PV cell can generate only a small amount of electricity in terms of total wattage, as each cell generates electricity of only 1 to 2 watts.

In order to generate large amount of electrical energy, a solar panel should be constructed by joining several solar cells. As a single solar panel can produce only limited amount of electricity, several panels are linked together to build a solar array.

It is essential to combine several panels to generate sufficient amount of solar energy to supply power to an entire house. The natural benefit of a solar cell system is that it will enable production of large amount of electricity by assembling a number of solar cells to construct solar panels.

Another advantage with a PV energy system is that it can facilitate generation of additional units of electric power by simply combining more number of Photovoltaic panels.

There are different types of solar panels with numerous power generation properties and depend upon the type of material used to construct panels. Thin-films, mono-crystalline or polycrystalline components can be used to build solar cells. The thin-film solar cell comprises alloys (amorphous-silicon) that can be stocked in thin layers placed on a base.

It will be fairly elastic depending upon the ‘substrate’ utilized and is thus more suitable in specific conditions. In contrast, a mono-crystalline cell is developed from single silicon crystal rod and is, therefore, more sturdy.

The silicon rod is chopped into thin wafers so that a proper foundation is provided within which solar cells are developed. Polycrystalline solar cells are produced from various silicon crystals that are heated and later cooled in molds to produce ingots of silicon. The ingot is subsequently sliced into wafers and a cell is produced similar to thin-film solar cells.

The efficiency of a solar power panel installed at home is appraised by the ratio of the output to input electric power. The efficiency factor of PV panels normally varies from 10 to around 19 percent.

The cost of each solar panel will depend upon its efficiency rating. In order to obtain a higher efficiency rating in solar power generation, one has to spend more money for each panel. Those planning to install a new solar panel should compare the cost of installation with estimated savings in the long run due to higher efficiency factor so that they can make a suitable decision regarding the choice of Photovoltaic system.

In order to choose the proper set of PV panels that meet his energy requirements, one should have a good understanding of certain specific parameters that could form the basis for making a decision. The major parameters that one should take into account in order to evaluate various solar panels comprise ‘efficiency’, ‘rated power at STC’ (Standard t Test Conditions) and ‘rated power per square foot’.

Efficiency factor is expressed as the ratio of power generated from the solar panel to the input power of sunlight absorbed by it. Rated power at STC quantifies the total wattage of power generated from the solar cells under normal test conditions.

The rated power per square foot denotes the electricity generated from the solar panel at Standard Test Conditions per square foot of the panel’s surface area. The latest designs of home solar kits make the best use of sun light to generate electricity at peak efficiency levels and are now the most feasible choice to tap this type of renewable energy to meet energy requirements for residences.

Programmable Thermostats – Helping You Reduce Home Energy Usage

The programmable thermostats are electronic devices that facilitate in maintaining the room temperature at desired levels, thereby effecting substantial amount of savings on energy costs.

These thermostats are designed incorporating a series of commands instructing the monitor when to modify settings. They are known as ‘clock and setback thermostats’.

The thermostat, developed based on the latest technology is programmed in such a way that the room temperature can change according to the needs. For example, based on the settings the thermostat automatically changes the room temperature, when someone is away from home.

The system is easy to operate and works on the basis of pre-setting. Although many people are under the impression that thermostats are costly, whereas, they are quite inexpensive. The thermostats currently in the market are based on latest complex technology and require some understanding of the system before they can be operated.

The latest devices utilize sensors to detect a person’s presence in the room. They automatically function even no one is present in the house, as they can detect presence or absence and adjust the temperature settings without human intervention. The latest launch, Nest thermostat has made a sensational entry into the market, primarily due to iPod and iPad.

Nest thermostat incorporates state of the art technology and one can expect more such sensor-based products from ‘Intuit’ soon. In winter, one can program a thermostat to lower heating while going out of the house. The time of departure from home and the time of arrival must be set.

The thermostat will begin raising the temperature to the desired level inside, even before one returns home and when he enters the living room, he will feel very comfortable. In summer, the thermostat permits a person to indicate the time of the day and the desired level of cooling so that when he returns after a busy day at office, he will find the rooms pleasantly chill.

A programmable thermostat saves a lot of electricity and consequently, large savings in energy bills. The home owners can prevent wastage of electric power by installing a programmable thermostat with a built-in motion sensor.

Those living on a limited budget and shifting from extreme climates need not worry any longer, if they install a programmable thermostat with a built-in motion sensor.

The spacious home owners can consider installing two programmable thermostats to monitor heating as well as cooling in several portions of the house. Those thinking of purchasing a programmable thermostat should also consider price aspect. Although the inexpensive models may not last longer, they may still contribute to savings on energy.

However, people interested only in sturdy thermostats will prefer quality to price. People buying the most superior model of programmable thermostat in the market will realize that the substantial savings on energy bills it yields will adequately compensate for the high price paid for it.

There are so several rebates and incentive programs accessible on the internet online that will enable in getting a thermostat almost free. One should also assess whether the thermostat he intends to buy is easy to operate. If it is a complex thermostat, one may not be able to utilize optimally and it may even produce adverse results.

It is, therefore important to ensure that the superior quality thermostat one proposes to buy is not only highly efficient but also simple to operate. This will help in making the best use of the thermostat, besides getting the benefit of substantial savings on electricity bills that will help in getting back the money paid on the thermostat within a short period.

One should look around in several shops in the locality and then compare them with ones available online, before buying the thermostat.

Lux TX9000TS Programmable Thermostat

Are you looking tp purchase a programmable thermostats? If you are, check out the Lux TX9000TS seven day touch screen thermostat. Click on the link below for more information at Amazon.com/.

DIY Solar Homes Blog