The Earth 4 Energy e-book by Michael Harvey actually has 2 sections. One section consist of Do It Yourself (DIY) home solar power system while the other section covers a residential wind generator. In this post, I am going to review the wind generator section of Earth4Energy.

The residential wind energy guide is actually in PDF file format. It starts off by explaining how we can harness the energy of wind to produce electricity which can be used to supplement our home energy needs.

In general, the wind power system consists of 5 parts which are the generator, blades, mounting, tower and control panel.

The process works by using the blade to capture the wind potential energy to spin the generator which will produce Direct Current (DC). The current is then stored in a battery bank. A power inverter will be used to change the Direct Current to Alternative Current (AC). The AC can then be used to power most of the electrical appliances at home.

From the looks of it, making the wind generator is easier compared to making a home solar power system. Reason being, there are less wiring and soldering works.

A typical solar panel will require at least 70 soldering points. Your solar system may need from 3 – 5 solar panels. You can do the math there.

The hardest part in the construction process is making the blades of the wind generator. No doubt Earth4Energy provides a set of blueprint, but it does require some precision skill. It is best you have an electric saw and sanding machine.

Should you attempt to make the DIY wind generator yourself?

That depends on your personal skill set actually. If you can make a DIY solar panel, making a wind generator to work together with the system should not be much of a challenge for you.

Then again, if you can’t read a wiring diagram and if you are not good with hand tools, it is best you outsource the whole project and save yourself a bunch of headache.

For more information about Michael Harvey’s manual, check out the Earth4Energy review on this blog.

==> Click here to visit Earth4Energy now!

Does the Earth4 Energy e-book by Michael Harvey works? Will it help to reduce your home electricity bills?

The key behind the Earth4 Energy guide is to teach you how to make a Do It Yourself (DIY) solar panel with minimal cost. A typical Photovoltaic (PV) panel consists of 36 PV cells capable of generating 18 volts of electricity at 75 watts.

Joining a couple of solar panels together and you’ll be able to harness the free energy from the sun and use is to charge up a battery bank. The same battery bank can then be used to power some of your home electrical appliances and most of the lighting fixtures.

How much would it cost to make a solar panel on your own? By following the instruction in Earth4 Energy, you can get it done with less than $150. The budget can get lower if you are willing to do some work sourcing for used or recycled solar cells.

There is a disclaimer though. A homemade solar panel is not a difficult task. However, if you are not good with hand tools and you don’t know how to solder two pieces of wires together, the whole project can be very challenging for you.

Imaging this….you have 36 pieces of PV cell and each cell has 2 tabbing wires. All the tabbing wires have to be soldered to each other to form a series of photo conducting cell. Therefore, you have to do more than 72 soldered wire joints!

If you don’t feel comfortable handling hot iron rods or working with molten metal, it is fair to say making the DIY solar panel will not work for you.

So what’s your alternative then?

You can head over to Amazon.com and buy a readymade solar panel.

To wrap up, is the Earth4 Energy guide by Michael Harvey the real deal?

It will show you how to make a solar panel on your own with step by step instructional videos, but the rest is up to you. If you have patient and dedication, the DIY solar panel will supply sufficient power for your home solar power system.

==> Click here to visit Earth4 Energy now!

If you are planning to use solar or wind energy for your home, most probably you will begin your research on the internet. When you are doing your research on the web, sooner or later, you will come across the Earth 4 Energy e-book by Michael Harvey.

Earth4Energy is one of the top selling home renewable energy guides on the internet. It sells by the thousands of copies every month.

Even with its popularity, many people are still not very sure where to download the e-book. In this article, I will explain the purchase process for the manual.

The main web site of Earth4Energy is located at www.earth4energy.com. It is a standard sales copy explaining the benefits of the manual.

At the bottom of the page, there is a “Add To Cart” button. Clicking on the button will bring you to the Secure Payment transaction form. At this stage, you may notice the Clickbank Marketplace logo.

If this is your first online purchase, you may not have heard of Clickbank.

Clickbank is actually the largest portal on the internet that sells information products and software. Clickbank handles millions of dollars of online transaction every year. It is a trusted and reputable company.

If you want to download the Earth4Energy e-book, Clickbank will handle the transaction for you. This means you do not deal directly with the publisher from Earth4Energy.

When someone purchased anything from Clickbank, he is automatically covered by their 60 days money back guarantee policy. For whatever reason, if you do not like what you have purchased, you can ask for a full refund within 60 days from the purchase date.

The mistake that many people made is going back to the publisher to ask for a refund. Most of the time, they will not get any support from the publisher because they went to the wrong channel. Clickbank has an entire system to handle refund.

When you are buying the Earth4Energy guide, you have 2 payment options. You can choose to pay by credit or debit card or you can select the Paypal option. Everything is very seamless.

When you are done with the transaction process, Clickbank will email to you a Purchase Receipt. You will also receive an email from the publisher of Earth4Energy with a link to the members’ download area. You can now begin to download the pdf and video files on to your computer.

==> Click here to visit Earth 4 Energy now!