What You Ought To Know About Impact Driver Cordless Drill

What is an impact driver used for? You are going to use a lot of this tool if you need to drive in a lot of screws, or if you going to build a deck, or you are going to drywall a room. This tool is very helpful in speeding up construction projects.

However, everybody cannot use them. The new cordless impact drivers are particularly confusing. They are used more for remodeling and construction rather than for pulling out nuts and screws. An impact driver helps in driving, into a surface, a particularly long screw.

It is a high-speed screw-driver, more or less like a drill. Impact drivers set the screw by giving it a tap as it is being set. The impact driver puts into screws into place easily and quickly.

Many a time impact drivers are mistaken for impact wrenches that are used by car mechanics to loosen or tighten the big car bolts and nuts. The earlier impact drivers were manual and still cause confusion when the unfamiliar search for impact drivers on the Internet. The manual ones had to be struck with a hammer to loosen the nuts and bolts.

Impact drivers’ rating is usually specified in inch/pounds. Additional factors that are listed by the manufacturers include the RPM and the beats per minute. Make sure you need an impact screw driver before you get one for yourself. They are not for everyone.

If you do not want to bend or strip the screw, or screwing it too deep inside or not properly setting it while using the impact screw driver, ensure that you have some practice before using it. Drive a few screws into scrap wood, before you try it on the actual surface that needs to be worked upon.

If you are going to work on thinner pieces of wood, make sure you have piloted holes prior to drilling, as the wood may get split when using the impact driver. Another tip is to use bar soap on the threads of the screw if you are planning to use them in hardwoods. They slip in easier, and a bar of Ivory soap would definitely come in handy.

A cordless impact screw driver is particularly suited for work on metal. Sheet metal construction like installing a tin roof, drywall on metal studs, and metal barn siding can find good use for the impact screw driver. They drive lag bolts with ease and neatly place sheet metal screws into duct work.

Remodeling tasks require very little time when impact screw drivers are used. There are plenty of demonstrations available that can familiarize you with how to use the tool for such tasks. Many branded impact screw drivers are available from Bosch, Craftsman, Hitachi, Makita, Milwaukee, Dewalt, and the new Panasonic.

The three speeds make Panasonic the most versatile and the best. But it is also the most expensive. The one that seems most difficult for me to use was the Craftsman Professional.

My experience was one of stripping most of the screws that I drove into pinewood. I also managed to break some ¼ inch stove bolts. The Craftsman C3 19.2 volt lithium and the Milwaukee Lithium models suited me fine. I considered them good value for money when I used them. They are available both as single units and as drill/driver/battery combo packs.

The least powerful among the lot was Craftsman NEXTEC, but there is no complaint really, as it is meant for the beginner. It pays to buy this model if you already own a NEXTEC auto hammer as the batteries are interchangeable. Otherwise, the ideal models to purchase would be 19.2 Craftsman or the Milwaukee. I would rate the rest of the models on the same plane.

Buy the model that you like. Unless you have an existing drill/driver with a good set of batteries, for example you can try purchasing a 18v Dewalt impact driver if you have a good 18 volt Dewalt Drill, buy an impact driver that has new lithium ion batteries.

The models that are powered with nickel-cadmium (Ni-Cd) batteries are heavier. They also take less time to recharge. However, the best feedback that I have got from contractors is for the Milwaukee LCT300W combo kit that they currently use. They are happy with the weight/power/battery ratio.

Black & Decker CCS818 Review – Is It Any Good?

The Black & Decker CCS818 is the perfect chainsaw for you and for every other cutter out there. There are many good reasons why this is so. Some of the reasons are found below.

1) Magazines speak favorably about it – which means that there should be little space for doubt in your mind. Writers of these magazines are often the experts in the field.

2) They know the product better – how they work, how they operate, what happens inside these tools. Hence, when these writers speak positively about a product, you can be sure that the product must be really good and efficient.

To the consumer, it means that the CCS818 electric chainsaw is worth their money and trust. Generally, reviews from actual users are positive about it also. We need to define first though what “review” really means in the context of this article.

Reviews refer to comments and feedback from people who have already brought the product and have tried it themselves. These people were not paid just to post their comment online hence we can certainly say that what they are saying is close to the truth.

[quoteRotator]

The Black & Decker CCS818 garnered overall favorable product reviews from consumers. Positive comments about its efficiency are found all over the page. Of course, there are also those who were not satisfied with the product but their numbers were considerably less than those who were greatly delighted to the point of recommending it to other people they know.

Black & Decker CCS818 – The Features

So what are this portable electric chainsaw features that people are talking favorably about? The product has absolutely many good features, the most common of which is its ability to decrease vibration when in use. Decreased vibrations would mean less hassle and hence more comfort to the operator.

In addition, the CCS818 model also comes with two fast-charging batteries to ensure that work continuously. Hence, when you are using one battery, you could have the other charged so that when the one being used is exhausted, you could readily replaced it with the charged battery.

Lastly, this product is very light and easy to use so that first-time chainsaw users, even children, could easily use it with comfort. Indeed with this product, cutting is a lot easier and more convenient to do.

If you have installed solar panels on your roof, you know shades from nearby trees will reduce the general power output capacity. Whenever possible, trim the branches so the PV panels will receive maximum sun expose.

If you are looking for a portable electric chainsaw, by all mean, check out Black & Decker CCS818. Click on the link below to order the chainsaw from Amazon.com and have it delivered to your doorstep for free.

==> Click here to buy Black & Decker CCS818 from Amazon.com!

Makita LCT300W Review – The Most Comfortable Drill To Work With

There are a number of drilling machines and they are all different in one way or the other. The major differences can be in style, design, material used for their manufacture, brand and appearance.

The drilling machine one uses should be suitable for the job he/she does. Till a few years ago, only wired drills were available to drill holes on wood but now there are cordless drilling machines which make drilling job easier and more convenient.

Among the cordless drilling machines, Makita LCT300W cordless drill is the most popular one. It is designed in such a way that it becomes very easy to work with. It can also work nonstop for very long periods. It is a very simple machine so that even unskilled people can use it for drilling jobs.

Makita LCT300W – Power Without Force

You don’t have to exert force on the machine to drill because the machine is powerful enough to drill through any hard wood. The way the drill bit rotates makes it possible to make holes on wood with the minimum effort.

Since the LCT300W cordless drills don’t use wires to connect them to electric power points, you have full freedom of movement. Wired drills limit your movements while you work. You also need to find a convenient place to plug in your wired drill.

With a cordless drill, you can work anywhere, even at places where there is no power supply. Compared to other drills, Makita LCT300W cordless drill is lightweight and ergonomic.

Makita LCT300W Model – Ergonomically Designed For Comfort

In many ways, a Makita LCT300W model cordless drill is different from other drills. Its body is sleek and slightly angled so that it is very easy to hold in your hand and to work with.

The rubber covered handle offers a firm grip and there is no chance of slipping. Compared to other drills, it is very light and so there is no strain on your muscles.

The peculiar design of its body makes it possible even to drill holes at places which are difficult to reach with other drills. Though the drill is lightweight and small in size, it is powerful enough to drill on any hard wood.

Drilling with this cordless drill is a pleasant experience. An additional feature of Makita cordless drill is its locking system. Even while working with it, we can shift the operation mode either to drilling or to driving.

Since the operation mode is locked, there is no chance of accidently changing one mode to another. When you buy a Makita LCT300W cordless drill, you get some accessories too along with it.

There are two more batteries which you can use as back up if you need to work for long hours. There are some brushes also which are meant to clean the machine. The drill, while drilling holes on wood, collects dust and dirt and it is important to clean the drill from time to time.

The LCT300W drill needs 18 volts to function and this power is supplied by the attached batteries. The drill is therefore power efficient and easy to use.

Are you keen to get a Makita cordless drill for your DIY work at home? If you are, click on the link below to get one from Amazon.com and have it delivered to your doorstep.

DIY Solar Homes Blog