Broken Photovoltaic (PV) Cells – What Are They Good For?

Home/DIY Solar Panels/Broken Photovoltaic (PV) Cells – What Are They Good For?

Broken Photovoltaic (PV) Cells – What Are They Good For?




Broken solar cells can be reused for setting up a test-solar panel for your homemade solar solution. For generating personal solar-power, broken Photovoltaic (PV) cells are very much useful, cheap and efficient. In fact they are parts coming out after remaining as burnt copper for a long time and capable of creating and storing more electricity in a limited space.

For a new homemade solar panel, cracked or busted solar cells will work great. However it will be a bit complicated to try working with damaged solar cells when initially setting up a solar panel at home. On such occasions, try working with unbroken PV cells.

Damages on the solar cells may sometimes be more than a chipped corner. Some of them may be the ones broken into two or multiple pieces. Hence they are not recommended for Do It Yourself (DIY) attempts.

The fact remains that the cracked solar cells are as effective as new ones or the secondary for setting up any project. They can be bought at a very low cost from secondary market. During energy generation process, the defective cells are repaired or replaced offline by inserting the typical strings immediately.

It is also possible to replace the defective cells or resolve them for reuse in the energy producing process. Solar cells are high in resolution within a short duration. If there is enough patience and time, you can observe the efficiency of damaged solar-cells that still work great and are economical.

Before going to buy such cracked or chipped cells for reuse, you should be able to check them out and buy only the worthy ones.

It is high time to create awareness on solar panels particularly in the third world countries, where the sources of energy and financial resources are too bad. The developed countries should be highly responsible for increased environment pollution, thus they should realize the importance of solar energy.

Viability of using Photovoltaic technology for working on complex devises with the help of the Sun rays in the sky during the day time has to be explored. It is useful to move around and find out some sources using the broken cells or replacing the old solar cells with new ones.



If you are getting old parts for recycling, make use of slightly damaged cells in your endeavor. If the solar panel you build needs to be problem free, you should start with material gathering, including the solar cells. If it is not possible to gather the broken solar panels from your home town or local vendors, web sources will be useful to contact.

Assembling a solar panel for your own use will be a great leap forward in reducing the energy cost. By doing so, you can save a lot of money on electricity bills every year. By using solar energy, you are going green and the environment is saved from pollution.

Therefore it is ideal to assemble a solar panel for your own electricity usage. Such efforts may initially be time consuming and expensive, but with by prolong usage, you can save money by getting free electricity that would last for years to come.

By | 2016-11-28T18:38:40+00:00 April 3rd, 2012|DIY Solar Panels|0 Comments

About the Author:

Leave A Comment