DIY Solar System From Scratch – 4 Essential Components




Do you have high home electricity bills? Home power rates have been increasing ever since global crude oil reached its peak at $150 per barrel back in 2008.

Do you notice your home energy bill went up and stayed the same level even though crude oil prices have reduced? It’s funny isn’t it that energy bill can go up and seldom come back down.

Due to the high energy cost, many home owners are looking into renewable energy source such as solar power to reduce their power consumption.

The fastest way to start enjoying the benefits of solar energy is with a DIY solar system from scratch. However, there are many types of components needed on a DIY solar system. How do you choose?

When you are looking for home solar power kits in a hardware store or in Amazon.com, here are 4 key components you should out look for.

1) Solar Panel.

The solar panel consists of multiple Photovoltaic (PV) cells joined together in series. When you are choosing a solar energy kit, make sure the solar panel is capable of generating at least 12 – 18 volts of electricity.

The solar panel should have a combined current output of at least 60 watts. These criteria are important to charge a standard 12 volts deep cycle battery.

2) Charge controller.

The cables from the solar panels will be connected to a charge controller. The function of the charge controller is basically to regulate the power from the solar cells and also making sure the battery is not overcharged.

Overcharging the battery will drastically reduce its lifespan!

When the battery is fully charged, the charge controller will dump the excess power to a “load”, usually a heating element.

3) Deep cycle battery.

The battery is where you store the power generated by the solar cells. The kind of battery use for residential solar power system in the deep cycle type.

Remember, do not use car battery for a home solar system!

The deep power discharge required by a home solar system will destroy a car battery very fast.

Deep cycle battery is designed to be discharged at a lower level without damaging its internal components.

4) Power inverter.

Since a deep cycle battery can only store Direct Current (DC), you will need a device to change the DC to Alternate Current (AC).

To do that, you will need a power inverter.

Since most of our household electrical appliances use AC, you can now start to tap the electricity from the power inverter.

When you have more equipment using power from the solar power kit, you will start to see a reduction in your home monthly energy bill.

Solar Power Kits From Amazon.com

If you are looking for a good way for a DIY solar system from scratch, check out the Sunforce 50044 from Amazon.com. It comes with all the essential components needed to charge a deep cycle battery unit.

The Sunforce 50044 has more than 50 customers reviews and received an average 4 1/2 Stars rating. The kit is designed for RVs, cabins, homes, boats, back-up and remote power usage.

The home solar power kit is selling at $299.99 in Amazon.com and is available in the United States only.

For more information, click on the link below.

==> Click here for more Sunforce 50044 info at Amazon.com

Related web pages:
1) DIY Home Solar Power – 3 Tips On Choosing The Right Solar Contractor

2) 12 Steps Process For A Successful Home Solar Power System